济南博度旋转接头【耐高温】【耐高压】【多通路】,欢迎选购!

HD双通道液压旋转接头HS-G型号

  HS双通道旋转接头的具体参数:

  适用范围:

  转速:n≤1000RPM

  温度:t≤100℃

  压力:≤1.0MPa

  介质:水、空气、盐水、液压油

 

  

  HS双通道旋转接头的实物图:

  黄铜旋转接头的45度角图

  HD型|旋转接头

  具体参数:

  最高转速:100RPM-3000RPM 1RPM=1r/min

  最高温度:120℃

  最高压力:5MPa 1MPa=10公斤

  适用介质:冷却水、液压油、冷却剂、真空、气体

  留意:随转速、温度、压力的不同,运用极限值也不相同。

  选购阐明:

  各类型结构参数:

  1~完好的编号—可辨认旋转接头型式、结构、标准、尺度。

  H型包含以下几种类型Hd/Hd-F/HS-G/HS-GF/HS-X/HS-XF

  Hd合金壳体结构,单向螺纹衔接式;

  Hd-F合金壳体结构,单向法兰衔接式;

  HS-G合金壳体结构,双向内管固定螺纹衔接式;

  HS-GF合金壳体结构,双向内管固定法兰衔接式;

  HS-X合金壳体结构,双向流转内管旋转式。

  2~若订货螺纹衔接式旋转接头,请注明外管螺纹的左、右旋向。

  3~旋转接头的运用必需配用金属软管。

  D型|旋转接头

  具体参数:

  最高转速:500RPM

  最高温度:200℃

  最高压力:5MPa

  适用介质:水、蒸汽、油、空气

  留意:随转速、温度、压力的不同,运用极限值也不同

  选购阐明:

  1~完好的编号—可辨认旋转接头型式、结构、标准、尺度。

  D型包含以下几种类型DS-G/DS-GF/Dd/Dd-F

  DS-G端面密封结构,双向内管固定螺纹衔接式;

  DS-GF端面密封结构,双向内管固定法兰衔接式;

  Dd端密封结构,单向螺纹衔接式;

  Dd-F端面密封结构,单向法兰衔接式;

  2~若订货螺纹衔接式旋转接头,请注明外管螺纹的左、右旋向。

  3~旋转接头的运用必需配用金属软管。

  Q型|旋转接头

  具体参数:

  最高转速:100RPM

  最高温度:200℃

  最高压力:5MPa

  适用介质:水、蒸汽、热水、导热油等

  留意:随转速、温度、压力的不同,运用极限值也不同

  选购阐明:建议选择

  1~完好的编号—可辨认旋转接头型式、结构、标准、尺度。

  Q型旋转接头包含以下几种类型QS-G/QS-GF/Qd/Qd-F

  QS-G球面密封结构,双向流转内管固定螺纹衔接式;

  QS-GF球面密封结构,双向流转内管固定法兰衔接式;

  Qd球面密封结构,单向流转螺纹衔接式;

  Qd-F球面密封结构,单向流转法兰衔接式;

  2~若订货螺纹衔接式旋转接头,请注明外管螺纹的左、右旋向。

  3~旋转接头的运用必需配用金属软管。

  高温旋转接头(导热油旋转接头)

  具体参数:

  最高转速:300r/min

  最高压力:2.0MPa

  最高温度:350℃

  介质:导热油、饱和蒸汽、过热蒸汽、水、过热水

  这种旋转接头分四种类型

  QRD单向螺纹衔接式

  QRD-F单向法兰衔接式

  QRS双向螺纹衔接式

  QRS-F双向法兰衔接式

  注:QRS-X/QRS-XF为内管旋转式

  多通路旋转接头

  具体参数:

  1.压力:35MPa

  2.介质:水、液压油、矿物油、蒸汽、空气、乙炔

  3.转速:10-2000r/min

  4.温度:200℃--40℃

  液压旋转接头

  介质:液压油

  压力:21Mpa

  温度:120℃

  转速:300r/min

  高速高压旋转接头

  具体参数:

  介质:水、液压油、矿物油、蒸汽、空气、乙炔

  最大工作压力:70MPa

  转速:11000r/min

  温度:220℃—-20℃
 

1~ well numbered - recognizable swirling head type, structure, standard, scale.
The D type contains the following types of DS-G/DS-GF/Dd/Dd-F
DS-G end face seal structure, two-way inner tube fixed thread connection type;
DS-GF end face seal structure, two-way inner pipe fixed flange connection type;
Dd end seal structure, unidirectional thread connection type;
Dd-F end face seal structure, unidirectional flange connection type;
2~ if you order a threaded connection type rotary joint, please indicate the left and right direction of the outer tube thread.
The use of a metal hose must be used for the application of 3~ rotary joint.
Q type | rotary joint
Specific parameters:
Maximum speed: 100RPM
Maximum temperature: 200 degrees centigrade
Maximum pressure: 5MPa
Applicable medium: water, steam, hot water, heat conduction oil, etc.
Note: with the different speed, temperature, and pressure, the use of the limit is also different
Selection clarification: suggestion selection
1~ well numbered - recognizable swirling head type, structure, standard, scale.
The Q type rotary joint contains the following types of QS-G/QS-GF/Qd/Qd-F
QS-G spherical seal structure, two-way flow internal pipe fixed thread connection type;
QS-GF spherical seal structure, two-way flow inner pipe fixed flange connection type;
Qd spherical seal structure, one-way flow of thread connection type;
Qd-F spherical seal structure, one-way flow flange connection type;
2~ if you order a threaded connection type rotary joint, please indicate the left and right direction of the outer tube thread.
The use of a metal hose must be used for the application of 3~ rotary joint.
High temperature rotary joint (heat transfer oil rotary joint)
Specific parameters:
Maximum speed: 300r/min
Maximum pressure: 2.0MPa
Maximum temperature: 350 degrees centigrade
Medium: heat conduction oil, saturated steam, superheated steam, water, hot water
This kind of rotary joint is divided into four types
QRD unidirectional threaded connection
QRD-F one-way flange connection
QRS two-way threaded connection
QRS-F two-way flange connection
Note: QRS-X/QRS-XF is internal tube rotation
Multi path rotary joint
Specific parameters:
1. pressure: 35MPa
2. medium: water, hydraulic oil, mineral oil, steam, air, acetylene
3. speed: 10-2000r/min
4. temperature: 200 centigrade --40 C
Hydraulic rotary joint
Medium: hydraulic oil
Pressure: 21Mpa
Temperature: 120 degrees centigrade
Speed: 300r/min
High speed and high pressure rotary joint
Specific parameters:
Medium: water, hydraulic oil, mineral oil, steam, air, acetylene
Maximum working pressure: 70MPa
Speed: 11000r/min
Temperature: 220 C - -20 C